Located at the
Donghua University Science and Technology Park in Lane 365 of Shanghai
Xinhua Road, the Shanghai New Fiber Instrument Co., Ltd. has gained
achievements in development of textile measurement technology and science
research. The XQ Fiber Tensile Tester, XD-1 Fiber Fineness Tester, XH-1
Fiber Thermal Shrinkage Tester, XCP-1 Fiber Crimp Elasticity Tester, and
XQ-1B Pre-oriented Filament Tensile Tester construct a group of integrated,
techno-advanced synthetic fiber testing system.
Chemical Fiber Testing Apparatus:
Four Distinguished Products
Fiber Tensile Tester
Tensile Tester is the upgraded type of the XQ-1 Fiber Tensile Tester. It
is novelly designed and characteristic of high precision and high
stability. With the pneumatic clamping and software controlling, it
tests automatically, conveniently and high efficiently. Thus, it is now
widely used as the standardized fiber tensile tester in chemical fiber
3. XCP-1A Fiber Crimp Elasticity
It is the upgraded
type of the XCP-1 Fiber Crimp Elasticity Tester. It tests the number of
fiber crimps automatically by using the image processing technology and
thus eliminates the uncertainty of manually counting. The force
precision is 0.1mg, which is ten times the resolution of the old torsion
XD-1 Vibration Fiber Fineness Tester
measures the linear density of single tested fiber based on the string
vibration principle. It is finely constructed and vibrates fast.
Moreover, one pretension clamp covers a large range of fiber linear
densities. Therefore, it performs much better than the same kinds of
apparatus abroad and receives complimentary reviews from consumers.
4. XH-1 Fiber Thermal Shrinkage
It measures the
difference of the fiber length before and after it is thermally treated
using the image method. The apparatus is finely constructed and works
with high automation, and the results are precise and reproducible.
Further more, the failure rate is quite low.
High-strength and High-modulus Fiber
This apparatus is
used to implement the tensile test of high performance fibers, such as
carbon, Kevlar, high-strength polyethylene fibers and so on. When it is
connected with the XD-1 Fiber Fineness tester or the XGD-1 Fiber
Diameter Tester, the strength, modulus and specific work of the fiber
shall be tested.
Pre-oriented Filament Yarn
measures the single values and statistic values of the indices including
the natural elongation, EYS1.5, natural extension ratio, maximum
extension ratio, breaking force, and breaking elongation.
The apparatus is
used to implement the tensile test of engineering staple fibers with the
length less than 6mm. The measured indices include the strength,
modulus, specific work of the fibers and so on. The fiber diameter is
measured by the associate XGD-1 Fiber Diameter Tester.
The apparatus is
used to measure the tensile strength and elongation of the tested fiber.
It can also be used to implement the (circulating) elasticity test at
specified elongation, the (circulating) elasticity test at specified
force, the stress relaxation test and the creep test of the fiber,
especially for elastic fibers.
💜 In this apparatus, t⛄he high-precision sensors are adopted and the force
resolution is high. It is used to test the dry and wet strengths as well
as the wet modulus of rayon fibers.
Tensile and Elasticity Tester
The apparatus is up to the national standard of testing the elastic
recovery ratio of spandex yarns by the circulating elasticity test at
specified elongation. It tests automatically and the force is measured
with high precision. The apparatus can also be used to test the elastic
recovery ratio of spandex yarns with other elasticity test method.
The apparatus is precisely constructed and the yarn samples are
pneumatically clamped. Furthermore, the apparatus tests with high
automation and stability. It is used to the tensile test of staple yarns
and chemical filament yarns.
Filament Yarn Tensile Tester
This apparatus is the function-extended type of the XL-1A Yarn Tensile
Tester. Except for the one time tensile test, it can also be used to
implement the (circulating) elasticity test at specified elongation, the
(circulating) elasticity test at specified force, the stress relaxation
test and the creep test of the objective yarns and so on.
Single fiber Fineness Tensile Tester
Video: The XCP-1&ಞnbsp;Fiber Crimp Elasticity Tester
XH-1 Fiber Thermal♊ Shrinkage Te꧃ster
Maker of textile testing equipment for
20 years, Automatic linear density, crimp and tensile tester for single
Single fiber linear density- (fineness) and tensile
tester, Automatic single fiber shrinkage tester.
Shanghai New Fiber Instrument Co., Ltd.
Copyright(C)2005-2019,All Rights Reserved